Round Water Trough, 250L to 2,000L
A one piece rotomoulded round trough available in four sizes from 250 to 2,000 liters, built from heavy duty, UV stabilised polyethylene with no seam to split and nothing to corrode. A 75mm bung at the very base drains almost all the water and sediment in one go, and the round shape lets a whole mob drink from every side at once.
A long trough makes stock queue along one edge. A round one lets them come in from every side, which matters when a mob arrives together and they all want water at the same time. There is no corner for a boss animal to guard, so more of the herd gets a fair go at the water.
The 250 and 500 liter sizes suit house paddocks, horses and small mobs of sheep. The 1,000 liter is the everyday choice for cattle on a rotational setup, and the 2,000 liter is for bigger mobs or paddocks where the refill flow is slow and you want a buffer sitting there.
The drain cap sits at the very bottom of the trough, not part way up the wall, so pulling it clears nearly all the water and the sediment along with it. Heavy duty, UV stabilised polyethylene means it will not go chalky and brittle after a few summers of full sun, and the smaller sizes are light enough to carry into position without machinery.
One piece rotomoulded from heavy duty, UV stabilised polyethylene, with no seam or join. A 75mm bung sits at the very base of the trough so it drains almost completely, sediment included.
Moulded from food grade polyethylene certified to AS/NZS 4020, the Australian standard for products in contact with drinking water, and manufactured to AS/NZS 4766 in an ISO 9001 certified facility.
Contact us to confirm the warranty terms and conditions for this model before you buy.
It comes down to mob size and how fast your line refills. The 250 and 500 liter sizes suit horses, sheep and house paddocks. The 1,000 liter is the common choice for cattle. Go to 2,000 liters if you are running a bigger mob or your refill flow is slow.
Heavy duty, UV stabilised polyethylene, rotomoulded so there is no seam or join. The polyethylene is food grade and certified to AS/NZS 4020 for contact with drinking water.
Pull the 75mm bung at the base and let it drain. Because the cap sits at the very bottom rather than up the wall, almost all the water and sediment goes out with it.
No. It arrives as one moulded piece, ready to plumb in.
Yes. Found it cheaper elsewhere? Let us know and we will do our best to beat it.
